Next Meeting: Sat, April 17, 2021
20 Most Recent Documents
Index by date,
SIGs (Internet, General Interest, Programming, Network, more..)
Pictures from Sept. 1999
The views expressed in articles on this site are those of their authors.
SCOUG was there!
Copyright 1998-2021, Southern California OS/2 User Group.
ALL RIGHTS RESERVED.
SCOUG, Warp Expo West, and Warpfest are trademarks of the
Southern California OS/2 User Group.
OS/2, Workplace Shell, and IBM are registered trademarks of
International Business Machines Corporation.
All other trademarks remain the property of their respective owners.
The Southern California OS/2 User Group
P.O. Box 26904
Santa Ana, CA 92799-6904, USA
Building Your Home/Small Business Network
Steve Schiffman, Networking SIG Leader
- Why do you need a network?
- Share files
- Share hardware resources like printers and modems
- Share applications
- Accessing the Internet
- Just because
- Internet network
- Home network
- Business network
- Hardware required
The hardware layer consists of the Network Interface Card (NIC) that
is installed in each PC, the cabling that connects the PC's
together, and various infrastructure components that assist in the
cabling connections, e.g. hubs/MAUs, bridges, routers, etc.
- 2 or more PCs
You don't need a separate server machine for a Peer network.
Each PC is a server.
- Network cards - Ethernet or token ring?
Many people chose ethernet for its relatively low cost hardware
components. One consideration when choosing your actual network cards is
how much manufacturer support you can obtain if and when you need
assistance. (And you will need assistance sometime. It is just a
matter of when). Keep in mind that the cheapest components usually
do not include support. Some do not even list a manufacturer's
address or telephone number. Prices of NICs range from $10 to $150
and come in ISA, EISA, MC and PCI bus versions.
- Hub or MAU, $35-$1800 depending on number of ports and management capabilities.
(Management capabilities are used for remote diagnostics and/or configuration). Bridges and routers are not needed for a SOHO network.
- Choosing your software
- OS/2 Warp 4 has all you need (even if you mix operating systems).
- TCP/IP and Peer Services
Using Warp 4, implementing a simple peer-to-peer network is
In a peer network, all workstations are servers to all other
workstations. At each workstation, you have to define what
resources of that workstation are to be shared with other
users/workstations. This works well with small networks.
- LAN Server/Warp Server
Use if you have greater needs.
- There are other options, too (NetWare, LANtastic for OS/2)
- Drivers for your network cards
An important point to consider when you choose your hardware
network interface card is whether OS/2 will support the NIC
out of the box or whether you have to obtain software
drivers from the manufacturer. Find out before you buy if
there is OS/2 software support.
- Network applications - the gravy
- Web server
- Play games across the network (home network, not business network :-) )
- Workgroup enabled products
- Internet Network
The Internet is a network too. Install the TCP/IP component in the Selective Install for Networking menu to get the Internet dialer, web browser and TCP/IP components installed.
- OK, how do you do it?
OS/2 Warp Version 4 has all the networking components built in.
- Install/Configure networking software components
Select the OS/2 System folder --> System Setup folder --> Install/Remove folder --> Selective Install for Networking object icon.
- Install and configure File & Print Sharing
Remember the userid and password that you supply during the install.
Better yet, write the userid/password down because
forgetting the userid/password will require that you re-install File & Print Sharing.
- Install and configure MPTS for your lan adapter
- Select the NIC adapter installed in you system.
- Select the protocols to use: NETBIOS, TCP/IP.
Other protocols may be needed for special circumstances such as Netware Requester (IPX/SPX) for NetWare server connection, 802.2/SNA/APPC for IBM host operating systems (VM/CMS, MVS, OS/390, OS/400)connection and NETBIOS over TCP/IP. The 802.2 protocol is needed if you have a network attached printer.
- Optionally install the TCP/IP component (required if you want to connect to the Internet)
- Optionally install other networking components (but not on the initial install of OS/2)
- Use the Connections Folder to manage resources
Select the Connections Folder --> Network Folder --> Network Services Folder --> Shared Resources and Network Connections object icon.
- The Identity tab: Workstation names
Displays the workstation name and Domain name.
If you want PEER services to automatically start when you startup your system, check the check box.
- The Shares tab: Sharing Resources
Use to define the resources on this workstation that you want other peer workstations to be able to use.
- The Connections tab: Connecting to Resources
Use to connect to resources defined on other peer workstations that the other workstation allows you to use.
- The Users tab: User Account Management
Use to manage userids. Make sure that your userid has admin authority, otherwise you will not be able to define resources to share with other peer workstations.
- The Groups tab: Groups
Defines userid groups. For a SOHO network, use the default group name.
- The Configuration tab: Configuration
Contains the Peer Services configuration values. No need to change for a SOHO peer network.
- Lets do it.
Demo of OS/2 Warp Version 4 Peer Networking
- Questions and Answers